Template:Refimprove KeeLoq is a proprietary hardware-dedicated NLFSR-based block cipher. The uni-directional command transfer protocol was designed by Frederick Bruwer, PhD, CEO at Nanoteq (Pty) Ltd and the cryptographic algorithm was created by Professor Gideon Kuhn with the silicon implementation by Willem Smit, PhD, at Nanoteq Pty Ltd (South Africa) in the mid 80's and sold to Microchip Technology Inc in 1995 for $10 million. It's used in "code hopping" encoders and decoders such as NTQ105/106/115/125D/129D and HCS101/2XX/3XX/4XX/5XX. KeeLoq is or was used in many remote keyless entry systems by such companies as Chrysler, Daewoo, Fiat, GM, Honda, Toyota, Volvo, Volkswagen Group, Clifford, Shurlok, Jaguar, etc.
KeeLoq "code hopping" encoders encrypt a 0-filled 32-bit block with KeeLoq cipher to produce a 32-bit "hopping code". A 32-bit initialization vector is linearly added (XORed) to the 32 least significant bits of the key prior to encryption or decryption.
KeeLoq cipher accepts 64-bit keys and encrypts 32-bit blocks by executing its single-bit NLFSR for 528 rounds. The NLFSR feedback function is 0x3A5C742E or F(a,b,c,d,e) = d ⊕ e ⊕ ac ⊕ ae ⊕ bc ⊕ be ⊕ cd ⊕ de ⊕ ade ⊕ ace ⊕ abd ⊕ abc. It uses bits 1, 9, 20, 26 and 31 of the NLFSR state as its inputs during encryption and bits 0, 8, 19, 25 and 30 during decryption. Its output is linearly combined (XORed) with two of the bits of the NLFSR state (bits 0 and 16 on encryption and bits 31 and 15 on decryption) and with a key bit (bit 0 of the key state on encryption and bit 15 of the key state on decryption) and is fed back into the NLFSR state on every round.
KeeLoq was first cryptanalyzed by Andrey Bogdanov using sliding techniques and efficient linear approximations. Nicolas Courtois attacked KeeLoq using sliding and algebraic methods. The attacks by Bogdanov and Courtois do not pose any threat to the actual implementations that seem to be much more vulnerable to simple brute-force of the key space that is reduced in all the code-hopping implementations of the cipher known to date. Individual "code hopping" implementations are also often vulnerable to a replay attack exploited by jamming the channel while intercepting the code, since code hopping is done by incrementing the IV on each use instead of using the current time.Template:Clarify It made KeeLoq "code grabbers" quite popular among most car thievesTemplate:WhoTemplate:Citation needed, although some of them use FPGA-based devices to break KeeLoq-based keys by brute force within about two weeks thanks to the reduced key length in the real world implementations.Template:Citation needed
In 2007, researchers in the COSIC group at the university at Leuven, Belgium, (K.U.Leuven) in cooperation with colleagues from Israel found a new attack against the system. Using the details of the algorithm that were leaked in 2006, the researchers started to analyze the weaknesses. After determining the part of the key common to cars of a specific model, the unique bits of the key can be cracked with only sniffed communication between the key and the car.
In March 2008, researchers from the Chair for Embedded Security of Ruhr University Bochum, Germany, presented a complete break of remote keyless entry systems based on the KeeLoq RFID technology. Their attack works on all known car and building access control systems that rely on the KeeLoq cipher.
The attack by the Bochum team allows recovering the secret cryptographic keys embedded in both the receiver and the remote control. It is based on measuring the electric power consumption of a device during an encryption. Applying what is called side-channel analysis methods to the power traces, the researchers can extract the manufacturer key from the receivers, which can be regarded as a master key for generating valid keys for the remote controls of one particular manufacturer. Unlike the cryptanalytic attack described above which requires about 65536 chosen plaintext-ciphertext pairs and days of calculation on a PC to recover the key, the side-channel attack can also be applied to the so-called KeeLoq Code Hopping mode of operation (AKA rolling code) that is widely used for keyless entry systems (cars, garages, buildings, etc.).
The most devastating practical consequence of the side-channel analysis is an attack in which an attacker, having previously learned the system's master key, can clone any legitimate encoder by intercepting only two messages from this encoder from a distance of up to Template:Convert. Another attack allows to re-set the internal counter of the receiver (garage door, car door, etc.) which makes it impossible for a legitimate user to open the door.
Microchip introduced in 1996 a version of KeeLoq ICs which use a 60-bit seed. If a 60-bit seed is being used, an attacker would require approximately 100 days of processing on a dedicated parallel code-breaking machine before the system is broken.
- ↑ Some evidence that Chrysler indeed uses KeeLoq can be found in (this video).
- ↑ How To Steal Cars — A Practical Attack on KeeLoq
- ↑ A complete break of the KeeLoq access control system
- ↑ Template:Cite paper
- ↑ a Microchip press release on Dec 11, 1996
- ↑ Martin Novotny and Timo Kasper, Cryptanalysis of KeeLoq with COPACOBANA, SHARCS 2009 Conference
- Embedded Security Group at the University of Bochum
- Nanoteq Pty Ltd website
- Microchip Technology Inc website
- C source code by Ruptor
- MICROCHIP TECHNOLOGY INC - Form:10-K Filing Date:6/3/2002
- Andrey Bogdanov, 'Cryptanalysis of the KeeLoq block cipher'
- N.T. Courtois and G.V. Bard, 'Algebraic and Slide Attacks on KeeLoq'
- 'Microchip press release on the acquisition of KeeLoq'
- 'Microchip press release on Theoretical Code Cracking'
- Physical Cryptanalysis of KeeLoq code-hopping applicationsde:Keeloq